Purlin lines
Purlin lines in three series
Channels, Cee and Zee purlins, eave struts and sigma sections from one line. Choose the series by the output you need in a shift and how often you change product.
Watch a Vietsteel purlin line run on YouTubeThe series
Standard, Advance Series and Auto-Pro.
Each is a purlin line built to your sections and sizes. The difference is the output in a shift and how much of the set-up and changeover is automated.
- Quick change
Standard Purlin Line
For jobbing shops with lower volumes that need a high degree of flexibility.
- Output
- Typically up to 8,200 ft a shift
- Changeover
- Quick change. Typically 4 to 5 product changes a shift
- Operation
- More manual in set-up and operation
- More automation
Advance Series
For production shops that need regular supply, with easy set-up and operation.
- Output
- About 8,200–12,500 ft a shift
- Changeover
- Some automation for changeover, to minimize downtime
- Operation
- Easy set-up and operation
- High performance
Auto-Pro
The top of the range: a much larger, longer line, configured for the output you need.
- Output
- Configurable up to 39,400 ft a shift
- Changeover
- Tends to be fully automated
- Line
- A much larger, longer machine than the other two
The photographs show Vietsteel purlin lines. Each line is built to its own specification.
Compare
Output and changeover, side by side.
The same sections on every series. Choose by the output you need in a shift and the way your shop changes product.
- Standard Purlin Linetypically up to8,200 ft8,200 ft (2,500 m)Typically the most a Standard Purlin Line runs in a shift
- Advance Seriesabout8,200–12,500 ft8,200–12,500 ft (2,500–3,800 m)About what an Advance Series line runs in a shift
- Auto-Proconfigurable up to39,400 ft39,400 ft (12,000 m)The most an Auto-Pro line can be configured for in a shift
| Standard Purlin LineQuick change | Advance SeriesMore automation | Auto-ProHigh performance | |
|---|---|---|---|
| Built for | Jobbing shops: lower volumes, with a high degree of flexibility | Production shops: regular supply, with easy set-up and operation | The highest output in the range |
| Output in a shift | Typically up to 8,200 ft | About 8,200–12,500 ft | Configurable up to 39,400 ft |
| Set-up and changeover | More manual in set-up and operation, with quick change. Typically 4 to 5 product changes a shift. | Easy set-up and operation, with some automation for changeover to minimize downtime. | Tends to be fully automated. A much larger, longer machine than the other two series. |
| Sections | Channels, Cee purlins, Zee purlins, eave struts and sigma sections, with single or double lips | ||
| Sizes | Specified to your minimum and maximum product sizes | ||
| Punching | Configured to the hole patterns you specify, and matched to the output of the series | ||
Sections
Five section families from one line.
With single or double lips, across the minimum and maximum sizes you specify.
- ChannelNo lips
- Cee purlinLipped
- Zee purlinLipped
- Eave strutSloped flanges
- SigmaStiffened web
- Double lipOr single lip
Every line is flexible in specification: tell us the smallest and largest of each section you run, and the line is built to that range. The section drawing on the home page shows each one forming.
Punching
Punching configured to your parts.
Specified to the hole patterns you need. How much punching a line carries depends on the series and on the output you need in a shift.
Line flow
Station by station.
The station order on Vietsteel’s published automatic purlin lines. Punching and pre-cut come before forming.
- Decoiler
- Straightener
- Punching
- Pre-cut
- Roll forming
- Cut-off
- Run-out table
Reference figures
A typical size range.
What Vietsteel publishes for its automatic purlin lines, as a guide. Your line is specified to your own minimum and maximum sizes.
- Web
- 4–16 in
- Flange
- 2–5 in
- Thickness
- 16 to 10 gauge
- Yield strength
- 44–65 ksi
- Eave strut
- Up to a 4:12 roof pitch
- Coil width
- 7.8–28 in
- Length tolerance
- ±0.04 in
- Punching
- Hydraulic, on servo-positioned punching stations
- Control
- PC control with Vietsteel purlin software
- Power supply
- 480 VAC, 3-phase, 60 Hz
- Components
- PLC Siemens; encoder Kübler; motors ABB or Toshiba; hydraulics Yuken
Stacking
Automatic purlin stacker.
An option at the end of the line. Figures are Vietsteel’s published specification for its automatic purlin stacker.
- Cycle
- 8 seconds a part
- Part length
- Up to 57 ft
- Bundle weight
- Up to 8,800 lb
Coil management
Feed the line from a coil farm.
COILSWIFT is a fully automated coil management system: an unmanned coil changer fed from a farm of 20 coils or more.
Contact
Tell Kerry what a shift looks like.
Send your sections with their smallest and largest sizes, your hole patterns, and the output and product changes you need in a shift. He will recommend a series and quote it.
- US sales contact
- Kerry Hayes
- Phone
- (216) 618-1552
- General inquiries
- enquiry@vietsteelusa.com